1930 Melbourne Mint Gold Sovereign

King George V saw his role as monarch as being to embody those qualities his far-flung subjects saw as their greatest strengths - diligence, dignity & duty.
Australian designer Bertram Mackennal obviously held these values in mind when casting his portrait.

The King George V "Small Head" obverse has 2 rows of beading around the rim and was seen rather late in the life of the sovereign. It was issued only 1929 to 1931, the last 3 years which Australia was on the gold standard. It was introduced in an attempt to improve the level of detail seen both in the obverse & reverse designs and prevent 'ghosting ' of the reverse design. One of the technical considerations for an artist designing a coin is that when the coin is struck, the metal should flow evenly throughout both designs. If the design is higher on one side than the other, then not all of the opposing design will be clear. This was thought to be the case with the George V Large Head portrait, hence the change.

There are slight alterations to the St George reverse with changes to the folds in the cape, his sword and the broken lance on the ground.
Due to the smaller portrait, there is a larger portion of the fields exposed on the Small Head than on the Large Head. This coin is more prone to having bag marks in the fields as a result. All of the same high points as on the Large Head portrait should be examined.
The points to examine when grading this obverse are:

The peaks of the eyebrow and upper cheek;
The fine detail in his moustache;
The broad area of hair above the ear & towards the fringe;
The neck muscle between his ear and the base of his neck.

Rev: Benedetto Pistrucci

Obv: Edgar Bertram Mackennal

Grading information on this page came from Andrew Crellin of Monetarium.
The full version of his article about George V sovereigns and many others can be found here.

Specifications
Composition *Gold Content*	91.67% Gold 8.33% Copper .2354 oz
Edge	Reeded
*Weight*	7.9881 grams
*Size:*	21.5 mm
*Grade*	Uncirculated
*Rev: Benedetto Pistrucci Obv*: Edgar Bertram Mackennal
Grading information on this page came from Andrew Crellin of Monetarium. The full version of his article about George V sovereigns and many others can be found here. Main

Main Gold Sovereigns 1930 Melbourne *22 Carat Gold*
King George V saw his role as monarch as being to embody those qualities his far-flung subjects saw as their greatest strengths - diligence, dignity & duty. Australian designer Bertram Mackennal obviously held these values in mind when casting his portrait.

*Mintage* 77,588 George V The King George V "Small Head" obverse has 2 rows of beading around the rim and was seen rather late in the life of the sovereign. It was issued only 1929 to 1931, the last 3 years which Australia was on the gold standard. It was introduced in an attempt to improve the level of detail seen both in the obverse & reverse designs and prevent 'ghosting ' of the reverse design. One of the technical considerations for an artist designing a coin is that when the coin is struck, the metal should flow evenly throughout both designs. If the design is higher on one side than the other, then not all of the opposing design will be clear. This was thought to be the case with the George V Large Head portrait, hence the change. There are slight alterations to the St George reverse with changes to the folds in the cape, his sword and the broken lance on the ground. Due to the smaller portrait, there is a larger portion of the fields exposed on the Small Head than on the Large Head. This coin is more prone to having bag marks in the fields as a result. All of the same high points as on the Large Head portrait should be examined. The points to examine when grading this obverse are: The peaks of the eyebrow and upper cheek; The fine detail in his moustache; The broad area of hair above the ear & towards the fringe; The neck muscle between his ear and the base of his neck.